Publications et Conférences

 

"Connaître, découvrir, communiquer—telle est, au fond, notre honorable destinée"
"To get to know, to discover, to publish—this is the destiny of a scientist"

From 'De L’Utiliteé des Pensions', Œuvres complètes de François Arago (1855), Vol. 3, 621.

Translation as given in Alan L. MacKay in A Harvest of a Quiet Eye (1977), 10. 

 
Articles publiés

• Ali, Z.S., Hosseinpoor, M., and Yahia, A. (2020) New aggregate grading models for low-binder self-consolidating and semi-self-consolidating                concrete (Eco-SCC and Eco-semi-SCC), Construction and Building Materials, Volume 265C, 120314, DOI: 10.1016/j.conbuildmat.2020.120314.

•  Ouro Koura B.A., Hosseinpoor M., and Yahia, A. (2020) Coupled effect of fine mortar and granular skeleton characteristics on dynamic stability            of self-consolidating concrete as a diphasic material, Construction and Building Materials, Volume 263C, 120131.

•  Abdalla A.H., Yahia A., Tagnit-Hamou A., (2020) Statistical modeling of mechanical and transport properties of concrete incorporating glass           

    powder, Journal of Sustainable Cement-Based Materials, DOI: 10.1080/21650373.2020.1793820.

•  Moeini, M.A., Hosseinpoor, M., and Yahia, A. (2020) Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars                used for 3D printing, Construction and Building Materials, Volume 257, 119551.

• Fantous, T., and Yahia, A. (2020) Effect of HRWR-VMA-AE combinations and shear on air-void characteristics in self-consolidating concrete,         

   Construction and Building Materials, Volume 253, 119192.    

• Fantous, T., and Yahia, A. (2020) Effect of viscosity and shear regime on the stability of air-void system in self-consolidating concrete using Taguchi

   method, Cement and Concrete Composites, Volume 112, 103653.

• Hosseinpoor, M., Ouro Koura, B.I., and Yahia, A. (2020) New methodology to evaluate the Reynolds dilatancy of self-consolidating concrete using        3D image analysis - Coupled effect of characteristics of fine mortar and granular skeleton, Cement and Concrete Composites,

   Volume 108, 103547.

• Ouro Koura, B.I., Hosseinpoor, M., Yahia, A., Kadri, E.-H., and Kaci, A. (2020) A new proportioning approach of low and normal binder self-     

   consolidating concrete based on the characteristics of fine mortar and granular skeleton, Construction and Building Materials, Volume 239,                   117892.    

• Fantous, T., Hosseinpoor, M., Yahia, A., and Selma, B. (2020) Numerical simulation of static and dynamic stability of air-bubbles in highly flowable.

   cement-based materials, Materials Today Communications, Volume 23, 100871.

• Fantous, T., and Yahia, A. (2020) Air-Void Characteristics in Highly Flowable Cement-Based materials, Construction and Building Materials,               

   Volume 235, 117454.

• Safhi, A.M., Rivard, P., Yahia, A., Benzerzour, M., Khayat, K.H., (2020). Valorization of dredged sediments in self-consolidating concrete:                         Fresh, hardened, and microstructural properties. Journal of Cleaner Production, V. 263.

• Mendes Saade, M.R., Yahia, A., and Ben Amor, M. (2020) How has LCA been applied to 3D printing? A systematic literature review and

   recommendations for future studies, Journal of Cleaner Production, Volume 244, 118803.

• Rifaai, Y, Yahia, A, Mostafa, A, Aggoun, S., and Kadri, E.-H. (2019) Rheology of fly ash-based geopolymer: Effect of NaOH concentration,               

   Construction and Building Materials, Volume 223, pp. 583-594. 

• Hosseinpoor, M., Ouro Koura, B.I., Yahia, A., 3 D image analysis to evaluate the effect of morphological characteristics of coarse  Saggregate               on Reynolds dilatancy of self-consoli   dating concrete., Cement and Concrete Composites., 2019.

   

• Ruschi Mendes M., Yahia, A., Ben Amor, M., What are the life cycle impacts of additive manufacturing ? A systematic review and                                   recommendations for the construction sector., Journal of Cleaner Production., 2019.

   

• Yahia, A., Mostafa, A., Structural build-up of cement-based materials for 3D printing. International RILEM Workshop on Rheological

   Measurements  of Cement-based Materials., S – IRWRMC 2018., France., 2019.

Y. Rifaai, A. Yahia, A. Mostafa, S. Aggoun, E. Kadri., Rheology of fly-ash based geopolymer : Effect of NaOH concentration., Construction and    

   building materials., 2019.​

• Hosseinpoor, M., Yahia, A., Khayat, K.H., Modeling of flow performance of self-consolidating concrete using Dam Break Theory and

   computational fluid dynamics., Cement and Concrete Composites., 2019.

 

• Daddy, k., Yahia, A., Chekired, M., Towards the prediction of rheological properties of self-consolidating concrete as diphasic material.                             Cement and Concrete Composites., 2018.                                         

    

•  Ouattara, D., Mbonimpa, M., Belem, T. Yahia, A., Assessment of rheological parameters of high density cemented paste backfill mixtures

    incorporating superplasticizer., Const.&Building Materials. In press.​, 2018. 

     

• AzariJafari, A., Yahia, A., Ben Amor, M. ()  Removing shadows from consequential LCA through a time-dependent modeling approach: policy-

​   making in road pavement sector.,  Env.Sc.&Tec. Accepted., 2018.
  
• Ouattara, D., Belem, T., Mbonimpa, M., & Yahia, A., Effect of superplasticizers on the consistency and unconfined compressive strength

   of cemented paste backfills., J of Const.&Building Mat, 181, 59–72., 2018.

Hosseinpoor, M., Khayat, H.K., and Yahia, A., ​Numerical simulation of dynamic segregation of self-consolidating concrete in T-Box set-up

    Computers and Concrete, N. 20, V.3, pp. 257 - 269., 2017.

     

• AzariJafari, H., Yahia, A., Ben Amor, M., Assessing the individual and combined effects of uncertainty and variability sources in comparative

   LCA of pavements., The International Journal of Life Cycle Assessment. March 2017 International Journal of Life Cycle Assessment., 1-15., 2017.

Long, W.-J., K.H. Khayat, A. Yahia, S.-D. Hwang, F. Xing., Rheological approach in proportioning and evaluating prestressed SCC”

   C&C Com, doi: 10.1016/j.cemconcomp.2017.

   
​• AzariJafari H., Yahia A., Ben Amor M., Influence of the materials selection and construction method variability on the life cycle environmental   

   performance of pavements in cold climate., International Journal of Life Cycle Assessment: in print., 2017. 

Hosseinpoor M., Khayat K. H., Yahia A., Numerical simulation of dynamic segregation of self-consolidating concrete in T-Box set-up.,

   Computers and Concrete, 20 (3), pp. 297-310., 2017.

• AzariJafari H., Yahia A., Ben Amor M., Assessing the individual and combined effects of uncertainty and variability sources in comparative

   LCA of pavements., The International Journal of Life Cycle Assessment, pp. 1-15., 2017.

• Ouattara D., Yahia A., Mbonimpa M., Belem T., Effects of superplasticizer on rheological properties of cemented paste backfills.,

   International Journal of Mineral Processing, 161, pp. 28-40., 2017.  

     

• Kabagire D. K., Diederich P., Yahia A., Chekired M., Experimental assessment of the effect of particle characteristics on rheological properties

   of model mortar., Construction and Building Materials, 151, pp. 615–624., 2017.

Hosseinpoor M., Khayat K. H., Yahia A., Numerical simulation of self-consolidating concrete flow as a heterogeneous material in L-Box set-up: .

   Effect of rheological parameters on flow performance parameters on flow performance., Cement and Concrete Composites, 83, pp. 290-307.,

    2017

• Hosseinpoor M., Khayat K. H., Yahia A., Numerical simulation of self-consolidating concrete flow as a heterogeneous material in L-Box set-up:

   coupled effect of reinforcing bars and aggregate content on flow characteristics., Materials and Structures 50 (2), p. 163., 2017. 

• Esmaeilkhanian B., Diederich P., Khayat K. H., Yahia A., Wallevik, Ó. H., Influence of particle lattice effect on stability of suspensions :

   application to self-consolidating concrete., Materials and Structures, 50 (1), p. 39., 2017.

   
• Sonebi M, Bassuoni M, Yahia A., Pervious concrete: Mix design, properties and applications., RILEM Technical Letters, 1, pp. 109-115., 2016.
           
• AzariJafari H., Kazemian A., Rahimi M., Yahia, A.,  Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-
   consolidating lightweight concrete., Construction and Building Materials, 113, pp. 215-220., 2016.


• AzariJafari H., Yahia A., Amor M. B., Life cycle assessment of pavements: reviewing research challenges and opportunities., Journal of Cleaner
    Production, 112, pp. 2187-2197., 2016.

 
• Kabagire K. D., Yahia A., Modelling the properties of pervious concrete using a full-factorial design., Road Materials and Pavement Design, 0 (0),  

    pp. 1-17., 2016.

    

• Mostafa A. M., Yahia A., New approach to assess build-up of cement-based suspensions., Cement and Concrete Research, 85, pp. 174-182.,              2016.

 

Articles de conférences

• Moeini M.A., Hosseinpoor M., Yahia A. (2020) Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength                    of 3D Printing Cementitious Mixtures, In: Bos F., Lucas S., Wolfs R., Salet T. (eds) Second RILEM International Conference on Concrete and                  Digital  Fabrication. DC 2020. RILEM Bookseries, vol 28. Springer, Cham, pp 73-82.

• Harbouz I., Roziere E., Yahia A., Lokili A. (2020) Physico-Chemical Characterization at Early-Age of 3D Printed Mortar, In: Bos F., Lucas S.,                     Wolfs R.,    Salet T. (eds) Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020. RILEM Bookseries,                             vol 28. Springer, Cham, pp    272-279 

• Rifaai Y., Yahia A., Mostafa A., Aggoun S., Kadri EH. (2020) “Rheological and Mechanical Properties of Alkali-Activated Hybrid Matrix for Self-              consolidating Concrete” Rheology and Processing of Construction Materials. RILEM Bookseries, vol 23. Springer, Cham.

• Ahmadah, Bessaies-Bey, H., Yahia, A., Roussel, N. (2020) Non-adsorbing organic admixtures enhancing the rheology of concrete for 3D printing.      Digital concrete 2020, Eindhoven, July 2020. 

• Moeini, A., Hosseinpoor, M., Yahia, A. (2020) Use of Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D

  Printable cementitious Mixtures. Digital concrete 2020, Eindhoven, July 2020.

• Harbouz, I., Roziere, E., Yahia, A., Loukili, A. (2020) Physico-chemical characterization at early-age of 3D printed mortar. Digital concrete 2020,

   Eindhoven, July 2020.

• Ahmadah, O., Bessaies-Bey, H., Yahia, A., Roussel, N. (2020) Effect of morphological characteristics on the viscosity of cementitious materials:            optimization of the rheological behavior of ternary cements, ICCM 2020, Toulouse, Juin 2020.

​                                                                   

• Rifaai Y., Yahia A., Mostafa A., Aggoun S., Kadri EH.  “Rheological and Mechanical Properties of Alkali-Activated Hybrid Matrix for Self-           

   consolidating Concrete”. RheoCon 2019, SCC 2019. September 2019, Dresden, Germany.

• Rifaai, Y., Yahia, A., Mostafa, A., Aggoun, S., Kadri, E., (2019) Rheological and mechanical properties of alkali-activated hybrid matrix for self-              consolidating concrete, In: Mechtcherine V., Khayat K.H., Secrieru E. (eds) Rheology and Processing of Construction Materials.                                      RheoCon 2019, SCC 2019. RILEM Bookseries, vol 23. Springer, Cham

 

• Sanni, B., Mohamed, H. M., Yahia, A., Benmokrane.,  Performance of Lightweight Self-Consolidating Concrete Columns Reinforced with

   GFRP Bars and Spirals., CSCE Annual Conference. Growing with youth. June 2019, Québec.

• Oumayma Ahmadah, Hela Bessaies-Bey, Ammar Yahia, Nicolas Roussel., Measuring the particle size distribution of blended cement.,

   ICCC 2019,  Septembre 2019, Prague, Tchèque. 

    

• Oumayma Ahmadah, Hela Bessaies-Bey, Ammar Yahia, Nicolas Roussel​., Contrôle de la rhéologie des liants à faibles impacts

    environnementaux :    Effet de la distribution particulaire des suspensions modèles dispersées et floculées sur les propriétés rhéologiques.,

   Lia Ecomat 2018, Université    de Sherbrooke, Mai 2018, Sherbrooke, Quebec.


• Oumayma Ahmadah, Hela Bessaies-Bey, Ammar Yahia, Nicolas Roussel., Amélioration de la rhéologie du béton pour la fabrication numérique

   par les polymères non adsorbés., Dixite3dPrint : Fabrication Additive pour la Construction. Quelle Actualité Nationale ?, Quelle Actualité

   Nationale ?, Ecole des ponts ParisTech, Jan 2019, Champs-sur-Marne, France. 

• D. Youness, A. Yahia, A. Tagnit-Hamou., New Rheo-Physical Approach for Powder to Control Rheology of Highly Flowable Concrete.,

   9th RheoCon2 Conférence and SCC9 Symposium. Le 8-11 septembre, 2019 (sera présenté). Dresden, Germany.

      

• Mohammad Amin Moeini, Ammar Yahia, Masoud Hosseinpour., Rheological Requirements of Cement-Based Mixtures Used for Additive

   Manufacturing, a Review., 2nd International Conference on Rheology and Processing of Construction Materials. Springer, 2019.

    

• Ouro Koura, B.-I., Hosseinpoor, M., Yahia, A.  Effect of Aggregate Packing Density and Rheological Properties of Mortar on Heterogeneous

   Performance of SCC., RheoCon2019: 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2),

   and 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), 8-11 September 2019, Dresden, Germany.

• Ouro Koura, B.-I., Hosseinpoor, M., Yahia, A., Effect of Sand Content and Rheology of Cement Paste on Visco-elastoplastic Properties of

   Simulated Lubrication Layer., RheoCon2019: 2nd International RILEM Conference on Rheology and Processing of Construction Materials

   (RheoCon2), and 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), 8-11 September 2019, Dresden, Germany.

• H  osseinpoor, M., Ouro Koura, B.-I., Sourice, T., Yahia, A.,  Evaluation of Morphological Aggregate Heterogeneity of Self-Consolidating        

    Concrete Using Image Analysis Techniques., RheoCon2019: 2nd International RILEM Conference on Rheology and Processing of Construction             Materials (RheoCon2), and 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), 8-11 September 2019, Dresden, Germany.


• Yahia, A., Mustapha, A., Structural build-up of cement-based materials for 3D printing., International RILEM Workshop on Rheological 

   Measurements of Cement-based Materials – IRWRMC 2018, May 2018, Arras, France.

     

• Yahia, A., Mustapha, A., Structural build-up of cement-based materials for 3D printing. Fourth International Conference on Energy, Materials,

   Applied Energetics and Pollution., ICEMAEP2018, April 29-30, 2018, Constantine, Algeria.

     

• Hosseinpoor, M., Khayat, K.H., Yahia, A., Numerical simulation of dynamic segregation of SCC in restricted and non-restricted flow conditions

   The Concrete Convention and Exposition, American Concrete Institute (ACI) Convention Spring 2017, March 26-30, 2017, Detroit, MI, USA.   

      

​​• Feys, D., Cepuritis, R., Jacobsen, S., Lesage, K., Secrieru, E., Yahia, A.Measuring rheological properties of cement pastes: most common

   techniques, procedures and challenges., RILEM Technical Letters (2017) 2:129‐135 DOI: http://dx.doi.org/10.21809/rilemtechlett.2017.43

     

​​• AzariJafari H., Yahia A., Ben Amor M., Let’s be more precise on infrastructure decision-making: Developing a dynamic consequential                             LCA model for pavements.,  LCA XVII, Portsmouth, NH, USA, October 2-5., 2017.

   
• Mostafa A. M., Yahia A., Effect of temperature on the kinetics of build-up of cement suspensions., Proceedings of 10th ACI/RILEM International

   Conference on Cementitious Materials and Alternative Binders for Sustainable   Concrete, Montreal, Quebec, Canada, October 2-4, 2017.

• Hosseinpoor M., Khayat K. H., Yahia A., Numerical simulation of dynamic segregation of SCC in restricted and non-restricted flow conditions.,
   ACI Spring 2017 Convention: Innovations in SCC Rheology, Detroit, MI, USA, March 26-30.  
     

• Hosseinpoor M., Khayat K. H., Yahia A., Numerical simulation of self-consolidating concrete flow as a heterogeneous material in L-Box set-up.,
   Proceedings of the 8th International RILEM Symposium on Self-Compacting Concrete & 6th North American Conference on the  
   Design and Use of Self-Consolidating Concrete: SCC 2016, Washington, DC, USA, May 15-18, pp. 561-571.  

     

• Hosseinpoor M., Khayat K. H., Yahia A., Mesbah H. A., Homogeneous analysis of self-consolidating concrete (SCC) casting in reinforced beam   

   using computational fluid dynamics (CFD)., Proceedings of the 8th International RILEM Symposium on Self-Compacting Concrete & 6th North

   American Conference on the Design and Use of Self-Consolidating Concrete: SCC 2016, Washington, DC, USA, May 15-18, pp. 549-559.

     
 

Sections d'un livre

•  Sonebi, M., Yahia, A., Chapter 1 – Mix Design Procedure, Tests, and Standards. Self-Compacting Concrete., Materials, Properties and

    Applications. Editor Elsevier S&T Books.

     

•  Sonebi M., Yahia A., Diederich P., Chapter 10 – Sustainability of cement, concrete and cement replacement materials in construction.,
    Sustainability of Construction Materials, 2nd Edition, Editor: Khatib J. M., Woodhead Publishing, ISBN 978-0-08-100995-6, pp.371- 392.,
    2016.  

     

•  Yahia A., Mantellato S., Flatt R. J., Chapter 7 – Concrete rheology: A basis for understanding chemical admixtures.,
    Science and Technology of Concrete Admixtures, Editor: Woodhead Publishing, ISBN: 978-0-08-100693-1, pp. 97-127., 2016.
     

•  Yahia A., Aïtcin P.-C., Chapter 26 – Self-consolidating concrete., Science and Technology of Concrete Admixtures, Editor: Aïtcin P.-C.
    and Flatt R. J., Woodhead Publishing, ISBN: 978-0-08-100693-1, pp. 491-502, 2016. 
           

•  Yahia A., Aïtcin P.-C., Appendix 2 – Experimental statistical design., Science and Technology of Concrete Admixtures, Editor: Aïtcin P.-C. and
     Flatt R. J., Woodhead Publishing, ISBN: 978-0-08, 2016.

 

Thèses

• RIFAAI, Yasser. Rhéologie des matrices hybrides composées de ciment et de géopolymère Thèse de doctorat. Spécialité génie civil,                             Université de Sherbrooke, 2020.

• Ouro Koura, Baba issa. Pompabilité des bétons autoplaçants à faible teneur en liant : étude des mécanismes de formation de la couche                  limite.Thèse de doctorat,  Spécialité génie civil, Université de sherbrooke, 2020.

• FANSTOUS, Toufik. Investigation expérimentale et modélisation numérique du comportement des bulles d’air dans les bétons fluides. Thèse de           doctorat, Spécialité génie civil, Université de sherbrooke, 2019.

• AZARIJAFARI, H. Development of a consequential dynamic model incorporating variability and uncertainty analysis for assessing life cycle

   environnemental impacts of pavements. Thèse de doctorat, Spécialité génie civil, Université de Sherbrooke, 2018.

•  KABAGIRE K Daddy., Modélisation expérimentale et analytique des propriétés rhéologiques des bétons autoplaçants.,

    Thèse de doctorat, Spécialité génie civil, Université de shrbrooke, 2018.

•  HOSSEINPOOR Masoud., Numerical simulation of fresh scc flow in wall and beam elements using flowdynamics models., Thèse de doctorat,

    Spécialité génie civil, Université de shrbrooke, 2016.

•  ALY Ahmed Mohamed Mostafa., Physical and chimical kinetics of structural build-up of cement suspensions., 

   Thèse de doctorat, Spécialité génie civil, Université de shrbrooke, 2016.

•   MAHAMT  Ali Abdoulaye., Caractérisation de liants cimentaires et des additions minérales et évaluation de l’influence de leurs
    caractéristiques sur la performance des Bétons Fluides à Rhéologie Adaptée (BFRA)
.,
Mémoire de maîtrise, Spécialité génie civil, Université 

    de Sherbrooke, 2019.

•  NESMENE Mohammed., Propriétés des bétons autoplaçants de haute performance préparés avec des granulats recyclés, Mémoire de

    Maîtrise Spécialité génie civil, Université de shrbrooke, 2018.

• Santamaria Diaz, N.K. Valorisation des granulats recyclés dans le béton pour les pavages et trottoirs. Mémoire de Maîtrise,

   Spécialité génie civil, Université de Sherbrooke. (2018).

•  AMIRI Soroush., Comportement du béton autoplaçant fibréàla résistance d'adhésion et la résistance au cisaillement.,

    Mémoire de Maîtrise, Spécialité génie civil, Université de shrbrooke, 2017.

• Turcano, V. Valorisation des granulats recyclés dans les bétons soumis au gel/dégel sans saturation (classes d’exposition F et R).

   Mémoire de Maîtrise, Spécialité génie civil, Université de Sherbrooke. (2017)